Moldings

Toe kick. Kitchen and bathroom cabinets come with toe kicks. We recommend installing this toe kick over the original cabinet toe kicks. It will cover small seams between cabinet toe kicks and make the toe kick area one solid surface.

Scribe molding. This molding has many uses, some them are decorating cabinet sides and bottoms, using between cabinets and walls or ceilings where a clearance is required, covering wall and ceiling imperfections and other uses.

Scribe molding with both edges rounded. This molding has many uses, some them are decorating cabinet sides and bottoms, using between cabinets and walls or ceilings where a clearance is required, covering wall and ceiling imperfections and other uses.

Outside corner molding. The inside part is 96" long x 1/2" wide. This molding is commonly used to finish exposed cabinet edges on islands and peninsulas.

Inside corner molding. This molding is commonly used to finish inside corners.

Quarter round molding. This molding is commonly used along cabinet toe kicks and sides when there are gaps between base cabinets and floor.

Light rail molding. This molding is mounted on wall cabinet bottoms to create a decorative effect and hide the under cabinet lighting.

Chair rail molding. This molding can be used to make decorative frames on cabinet sides, island backs and other flat surfaces.

Ogee molding. This molding has many applications including using it as a baseboard and general cabinet decoration.

Baseboard molding. This molding is commonly used for the decoration on cabinet sides and exposed cabinet backs.

Crown molding. The height is measured on installed molding under an angle, the actual height is bigger.

Classic crown molding with base. The height is measured on installed molding under an angle, the actual height is bigger.

Crown molding. The height is measured on installed molding under an angle, the actual height is bigger.

Single bead insert molding. This molding can be applied on the Regular Crown Molding, Classic Crown Molding, and edge of 3/4" thick Refrigerator Panel.

Triple bead insert molding. This molding can be applied on the Regular Crown Molding, Classic Crown Molding, and edge of 3/4" thick Refrigerator Panel.

Dentil molding insert. This molding can be applied on the Regular Crown Molding and Classic Crown Molding.

Rope molding insert. This molding can be applied on the Regular Crown Molding and Classic Crown Molding.